Mindman MP10 Series: Pressure Sensor – MP10P-04-M5-C
$43.00
Pressure Sensor, Pressure Type: Positive Pressure(0~0.6MPa), Output Type: PNP Output, Port Diameter: M5¡Á0.8, Wire Length / Connector: M8 3 Pin Male Fitting
10000 in stock
Features
● Easy to use; mounts directly on a quick coupler.
● Ultra-compact: 26¡Á10¡Á10.4 mm.
● Set Pressure Range
● Sensor: Negative Pressure (0~ ¨C101.3 k Pa)
Positive Pressure (0~0.6 MPa)
● Analog Output: Combined Pressure (¨C100~100 k Pa)
Compound Pressure (¨C101~500 k Pa)
Low Pressure (0~100 k Pa)
Negative Pressure (0~¨C101.3 k Pa)
Positive Pressure (0~1.0 MPa)
| Item | Specification |
|---|---|
| Dimensions | 26×10×10.4 mm |
| Operating / setting pressure range | Vacuum: 0~−101.3 kPa, Positive: 0~0.6 MPa |
| Medium | Air, non-corrosive / non-flammable gas |
| Proof pressure | Vacuum: 0.6 MPa, Positive: 1.5 MPa |
| Response time | Approx. 1ms |
| Current consumption | 10mA max. |
| Sensor type | NPN or PNP |
| Output short circuit protection | Yes |
| Setting method | Adjusting by VR |
| Indicator | Red LED turns ON |
| Enclosure | IP40 |
| Ambient temp. range | Operation: 0~60°C, storage: −20~70°C (no condensation or freezing) |
| Ambient humidity range | Operation / storage: 35~85% RH (no condensation) |
| Vibration | Total amplitude 1.5mm, 10Hz-55Hz-10Hz scan for 1 minute, two hours each direction of X, Y and Y |
| Shock | 980 m/s² (100G), 3 times each in direction of X, Y and Z |
| Piping method | Push-in tube or thread-in |
| Lead wire | Oil-resistance cable, 3 wires (0.18 mm²), φ2.6mm |
| Weight | Approx. 50 g (with 3-meter lead wire) |
Related products
Mindman MP10 Series
Mindman MP10 Series
Mindman MP10 Series
Mindman MP10 Series
Mindman MP10 Series
Mindman MP10 Series
Mindman MP10 Series
Mindman MP10 Series