Mindman MCDJ*Series: Dual-Rod Force-Multiplying Cylinder(Sliding Bearing) – MCDJ-03-10-50
$122.00
Dual-Rod Force-Multiplying Cylinder, Bearing Type: Sliding Bearing, Cylinder Bore: 10mm, Stroke: 50mm, Adjustable Stroke: 0~5mm, Piping Method: Standard Piping, Port Size: M5X0.8
10000 in stock
Features
● This dual-rod force-multiplying cylinder provides high-precision guidance; two pistons
rod design provides double the thrust.
● Standardized allowable lateral load, and the bearing length is increased for higher precision.
● Magnet fitted across the whole series.
| Item | Specification |
|---|---|
| Acting type | Double acting |
| Tube I.D. (mm) | ø6, ø10 |
| Port size | M3×0.5, M5×0.8 |
| Medium | Air |
| Max. operating pressure | 0.7 MPa |
| Min. operating pressure | ø6: 0.15 MPa, ø10: 0.1 MPa |
| Proof pressure | 1 MPa |
| Ambient temperature | -5~+60°C (No freezing) |
| Lubrication | Not required (If lubrication is used, apply turbine oil NO1 ISO VG32) |
| Available speed range | 50~500 mm/sec |
| Cushion | With rubber cushion pad (both side) |
| Sensor switch | RDC(V), RQC(V), RDFE(V), RDGV |
Related products
Mindman MCDJ Series
Mindman MCDJ*Series: Dual-Rod Force-Multiplying Cylinder(Sliding Bearing) – MCDJ-03-6-10
Mindman MCDJ Series
Mindman MCDJ Series
Mindman MCDJ*Series: Dual-Rod Force-Multiplying Cylinder(Sliding Bearing) – MCDJ-03-10-40
Mindman MCDJ Series
Mindman MCDJ Series
Mindman MCDJ*Series: Repair Kit(Standard Piping) – PS-MCDJ-6
Mindman MCDJ Series
Mindman MCDJ*Series: Dual-Rod Force-Multiplying Cylinder(Sliding Bearing) – MCDJ-03-6-50-P
Mindman MCDJ Series
Mindman MCDJ*Series: Dual-Rod Force-Multiplying Cylinder(Sliding Bearing) – MCDJ-03-10-10
Mindman MCDJ Series
Mindman MCDJ*Series: Dual-Rod Force-Multiplying Cylinder(Sliding Bearing) – MCDJ-03-6-40-P